Tensor Ring Pendant – “TRINITY” singers;teachers; public speakers; coachers; promoters (POWERFUL LEMURIAN frequencies)

Descrição

ANY DOUBT PLEASE SEND MESSAGE.

Care with Tensor tools and orgone.
Tensor tools and orgone:
– do not join the pendant rings to other metal necklaces, nor use with
metal wires; you can join the rings with some crystal and use necklace
threads in neutral material (cotton, cork, leather …).
– remove the pendants to sleep; put them on the nightstand, or
somewhere in the room.
– for protection while sleeping: place under the bed or between the
mattress and the platform, 1 large ring.
– remove the pendants for bathing and intimate activities.
– you can use the pendants in the gym;
– do not clean the rings with salt, or salty water; neither put them in the
sun and moon … they DO NOT NEED ANYTHING of that; you can damage
them if you do.
– NATURAL COPPER tensor tools can be cleaned with lemon juice and
warm water; 20 minutes to marinate; then use a kitchen sponge, green
side, to clean more and dry the piece well with a cloth. It is natural and
very normal for finger rings, bracelets, or even necklaces / pendants, to
“paint the skin”: copper oxidizes! And whenever the body is low on
copper, the skin will absorb this element, hence the area where the piece
lands is dark, bluish / greenish.
– DO NOT CLEAN SILVER TOOLS LIKE THE COPPER ONES! Nor clean the one
in tin copper, silver or gold platted. If the tin copper tools are much
oxidized, rinse them with warm water; use your hands to clean them
better, and dry them very well with a cotton cloth.
– Both the body and the tools need to rest, that is why it is good to take
them out during the sleep. However, if the night is difficult, place your
pendant under the pillow.
– I recommend having more than one type of pendant and frequencies to
keep changing. The body and the pieces appreciates that!
– I only use a pendant around my neck, chest area; when I leave the house
I add the finger rings and bracelets; when I am working (therapies), I add
other pendants (bracelets and finger rings), but when I finish, I have to
remove everything, just leaving the pendant I was already using.
————————————————————————–
Why do some tensor tools and orgone break, disappear, or heat up? These
tools are protective / balance / healing.
When something drastic happens to the person, the pieces absorb and
protect the wearer from it; and if the negative force was strong, they
protect until they brake; absorb the bad and brake.
Many heat up or cause pain; DO NOT TAKE THEM OUT! You can put them
in another area of the body if it is too uncomfortable, but do not take
them off, otherwise you lose its protective shield … and whatever is
wrong to enter your energy field, will enter. They are intelligent pieces
that perfectly fulfill their purpose. This can never happen to anyone and
they can last for years; or it can happen again with someone after days,
weeks or a few months of use; until it stops happening.
Another viable but less common hypothesis: the dark forces put on an
invisibility cloak over the tools so that their wearers cannot find them and
be protected, thus being receptive to the evil attacks of the dark forces.
When the pieces disappear from nowhere, the most common thing is that
the energy that is present is too heavy and they evaporate or go to
dimensions invisible to the human eye to carry out their function; it means
that they go to other dimensional planes to protect the astral / etheric /
plasma bodies, etc., from their carrier. YEA! This is because many of the
energy attacks are created in other dimensions, reaching these other
bodies of ours until they reach this physical body. Sometimes the tools
return even after months and people find them in unlikely places; and
sometimes they never come back.
What to do when they brake? Knead or cut the pieces into pieces and
throw them in the trash. Do not re-weld; do not take jewelers to arrange
as they are not pieces of jewelry. The energy was compromised; the tools
fulfilled their function, be grateful for that and thank them! Throw them
to a river or sea and AVOID HAVING THOSE BROKEN TOOLS AT HOME FOR
A LONG TIME! If it is orgone tools, throw them to earth/nature, not in the
water.
Mariana Alves Soprano, channeler of the tensor frequencies: Viking, RaMu, Sacred Continent, The Red Pyramid Trio (RED1, RED2, RED3) and
Indigo.

THE GOLD AND SILVER PLATED TRINITY SHOULD BE WORN OUT OF THE CLOTHES SO THAT THIS KEEPS THE GOLD AND SILVER IN TENSOR RINGS FOR LONGER.

Understanding how tensor rings and orgonites work to promote a healthy environment.

Materials

We craft our Tensor rings tools with copper, then they are plated with silver or 24K gold. In addition, subtle audio frequencies known to produce health improving effects and other beneficial qualities are embedded into all our tools as they are being made.

Copper: Copper is a metal that has, according to Slim Spurling, the ability to transmute cosmic energy into life force energy. Its natural tendency to oxidize with age gradually boosts its power.

Copper Tensor Rings are plated with a layer of silver or a layer of 24K gold. The 24K gold plating adds a higher frequency due to the structure of its atom in the crystal as it is applied to the tools. The reason for this is that it creates a thermocouple effect, generating a small voltage to be converted instantly to an electric current (measured in amperage) to increase the tools energy field.

The copper tensor rings PLATED with precious metals.

Beads: According to inventor Nikola Tesla spheres are amplifiers, so adding beads to some of the tools to amplify their beneficial effects. The more beads a tool features, the stronger its effects. Tools with beads have a stronger, denser tensor field – the beads essentially provide the rings with “more horsepower.” (NOTE: Tensor Rings without beads are used mainly in outdoor applications, over irrigation systems, over smart meters, and also to sit on during long hours of travel to help reduce fatigue and stiffness).

Heavy Gauge Copper: For the Heavy Tools, no silver or gold beads are required because the heavy gauge copper creates a stronger tensor field than the standard rings with beads, which may promote quicker health improvement.

Sterling Silver: Silver is a superior electrical conductor able to handle greater voltages and currents in electric circuitry. The sterling silver tools seem to work at a slightly different subtle level and appear to operate more smoothly and more quickly, due to a higher frequency. If you’ve never worked with this Tools, “smoother and quicker” may not mean anything to you – this statement came from practitioners who have worked with the copper tools for any length of time. They prefer now the sterling silver tools to the copper ones.

 

3 Tensor Rings:

Sacred Cubit 144mhz frequency

-This frequency mainly works on the physical and aspects of life.
-helps materialize ideas, attracts abundance.
-has a vertical energy field.
-works well against pain.
-helps with grounding.
-elements of earth and water.
-female energy.
-works on the fourth chakra.
-connects beings with the earth.
-works well at eliminating unhealthy energy fields (such as the hartmann grid, curry grid).
-neutralize wifi radiation.
-Works perfectly against a polluted environment.
-works very well with the Lost Cubit and the Empowerment cubit. Small pendant rings are very good for children and animals.

Lost Cubit 177mhz frequency

-is a lot stronger than the Sacred Cubit.
-this frequency mainly works on the mental, emotional and ethereal aspects of life.
-has a calming and soothing effect.
-works well against pain.
-helps bring the brain in balance.
-nice to meditate with.
-element earth and aether.
-a horizontal energy.
-works on the third, fourth and sixth chakras.
-balanced feminine and masculine energy.
-works perfectly against a polluted environment.
-plants love this frequency.
-very good for schools.
-works very well with the Sacred Cubit and with the Lost Cubit.

Empowerment Cubit 188mhz frequency

-mainly works on the inner and invisible aspects of life.
-Essential for healing therapies.
-The most powerful of these three Cubit sizes.
-Helps in contact with the invisible, spiritual guides, guardians, angels, earth elements.
-female energy.
-fire element.
-works on the third, fifth and sixth chakra.
-helps to come into your power.
-perfect for people who use their voice a lot, such as singers, -teachers, public speakers.
-helps with the descaling of the pineal gland.
-may not be worn on its own (chain hanger), only in combination with the Lost or Sacred Cubit. From the size of -the Travel Harmonizer or in the form of a Tensor Ring, this Cubit is possible on its own.
-Works perfectly with the Lost and Sacred Cubit.

Its natural tendency to oxidize with age gradually boosts its power.